Home > Lubricating Grease >

NLGI 2 Multipurpose Grease with Mechanical Stability, Load Control, and Corrosion Resistance

Product Categories

Motorcycle Engine Oil [13]
Gasoline Engine Oil [100]
Diesel Engine Oil [63]
Transmission Fluid [33]
Gear Oil [16]
Hydraulic oil [23]
Lubricating Grease [37]
Brake Fluid [7]

Foshan Yingba Lubricating Oil CO.,LTD

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

NLGI 2 Multipurpose Grease with Mechanical Stability, Load Control, and Corrosion Resistance

Contact Now

Product Detail/Industrial Lubricant

NLGI 2 Multipurpose Grease

A lubricating grease supplied under controlled formulation, mixing, filling and batch-release procedures for industrial and equipment maintenance programs.

2#Grease Pack

Start an OEM / ODM Project View Technical Details

NLGI 2 Multipurpose Grease with Mechanical Stability, Load Control, and Corrosion Resistance

Lubricating GreaseCustom Pack

CategoryLubricating Grease

Viscosity / Grade2#

PackagingGrease Pack

Supply FormatOEM / ODM

Product Positioning

Built around the application, not only the label.

Performance targets, base-oil route, additive system, packaging and test plan are aligned before production.

Mechanical stability

Thickener, base oil and additives are selected to support consistency under the intended service.

Load and wear control

The formulation can be tailored for bearings, chassis points and heavily loaded components.

Water and corrosion resistance

Protection targets are confirmed according to application and test plan.

Controlled consistency

Penetration, dropping point and other relevant checks can be defined in the product specification.

Technical Profile

Product specifications

Product categoryLubricating Grease

SAE / consistency grade2#

Packaging formatGrease Pack

How We Manufacture

From approved raw materials to released finished goods.

Our work begins when qualified base oils, additives and packaging materials enter the factory. The objective is a product that can be manufactured, tested, traced and repeatedly delivered.

Requirement definition

Application, market, performance level, viscosity, packaging, order volume and documentation are confirmed.

Raw-material acceptance

Supplier status, batch documents, packaging condition and relevant incoming properties are checked before use.

Formula and work instruction

The approved formula, dosing order, tolerances, temperature, mixing time and tests are controlled by version.

Blending and in-process QC

Materials are metered, blended and sampled. Out-of-target batches remain isolated until authorized action and re-test.

Filtration and filling

Line clearance, filtration, first-piece approval, fill quantity, closure, sealing, coding and carton checks are recorded.

Final release and traceability

Finished-product tests, packaging inspection and batch documents must be complete before shipment release.

Quality Evidence

Documents that correspond to the product and batch.

Documentation is supplied according to the final SKU, contract and market requirements.

COA

Batch Certificate of Analysis

Links the batch number, production date, release tests, specification limits and actual results.

TDS

Technical Data Sheet

Describes intended use, typical properties, performance level, viscosity grade and application guidance.

SDS

Safety Data Sheet

Covers hazards, handling, storage, transport, spill response and first-aid information.

LAB

Inspection and Third-Party Testing

Finished-product reports, validation tests or qualified third-party work can be arranged by project.

OEM / ODM Cooperation

Turn a market requirement into a repeatable product.

OEM is suitable when your product specification, brand and packaging are already defined. ODM starts earlier, with product positioning, formulation route, samples, packaging and validation developed together.

Performance levelViscosity gradeBase-oil routePack sizeBottle / pail / drumLabel and cartonTDS / SDS / COAExport support

01
Requirement review
Market, equipment, specifications, pack size, volume, target cost and launch timing.
02
Feasibility and proposal
Verified formula, optimized formula or new ODM development route.
03
Sample and golden standard
Sample version, internal testing, customer feedback and approved reference standard.
04
Packaging approval
Container, closure, seal, artwork, carton, code and shipping configuration.
05
Mass production and release
Version-controlled formula, documented process, batch testing and shipment documents.

Project Support

Common cooperation questions

Can performance level and viscosity be customized?

Yes. The product route can be selected around the target equipment, market position, climate, standard and cost target.

Can the bottle, pail, label and carton be customized?

Yes. Pack size, container color, closure, seal, label, carton, shipping mark and pallet method can be developed by project.

Which documents can be supplied?

Typical project documents include TDS, SDS/MSDS, batch COA and finished-product inspection records. Third-party testing can be arranged where required.

How is repeat-order consistency controlled?

Through approved samples, product specifications, formula version control, qualified materials, production instructions, process and final testing, batch records and retained samples.

Request a Quote

Tell us what you want to manufacture.

Include the target market, application, technical standard, viscosity or grade, pack size, estimated quantity and required documents.

Selected productNLGI 2 Multipurpose Grease

Company name

Contact name

Target market

Country / channel

Estimated quantity

Units, drums or tonnes

Project requirements

Application, specification, viscosity, packaging, documents and target launch date

Prepare Inquiry Summary

NLGI 2 Multipurpose Grease with Mechanical Stability, Load Control, and Corrosion Resistance Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Foshan Yingba Lubricating Oil CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!